Guide
Goods receipt inspection: checklist
A goods receipt inspection checks quantity, packages and outer condition against delivery note and order on arrival and records discrepancies at once – with the driver, on the consignment note. In a commercial sale between merchants the buyer must also inspect promptly and give notice of defects (Section 377 HGB).
Visible discrepancies should be recorded on delivery – what the driver does not sign for is hard to prove later. This checklist splits the inspection into two stages: what is checked and noted straight away while unloading, and what follows promptly afterwards, as far as the ordinary course of business allows. It also looks at the buyer's duty to give notice of defects under German commercial law – without replacing legal advice.
At a glance
| When | What to check | What to record |
|---|---|---|
| While unloading | number of packages and pallets, outer damage, wetness, load securing | note on consignment note/delivery note, photos, driver's name |
| After unloading | items, quantities, labels against the order | discrepancy report, notice to purchasing |
| After opening | concealed damage, function where needed | photos, prompt notice of defects to the seller |
Goods receipt inspection checklist
- 1. Have delivery note and order or advance notice ready
- 2. Check sender, recipient and reference
- 3. Count packages and pallets
- 4. Check outer condition: wetness, dents, torn film, leaning pallets
- 5. Note discrepancies on the consignment note or delivery note at once and have the driver countersign
- 6. Photograph damage with package number
- 7. After unloading, check items and quantities against the order
- 8. If needed, sample inside the packaging
- 9. Send the discrepancy report to purchasing or the responsible person
- 10. Notify the seller of defects promptly, for concealed defects after discovery
Duty to give notice under Section 377 HGB: what “promptly” means
Section 377 of the German Commercial Code applies to sales that are commercial transactions for both parties. The buyer must inspect the goods promptly after delivery, as far as feasible in the ordinary course of business, and give prompt notice of defects. “Promptly” means without culpable delay – the law sets no fixed number of hours or days. What is reasonable depends on the goods, the quantity and the effort of inspection.
If notice is not given, the goods are deemed approved, unless the defect could not be detected on inspection. If it appears later, notice must be given promptly after discovery. Sending the notice in time is enough to preserve the buyer's rights. A seller who fraudulently concealed the defect cannot rely on these rules.
Recording on the consignment note
A note “subject to inspection” without detail helps little. A specific description is better: “2 of 18 pallets with torn film, cartons wet underneath, photos taken” – signed by the driver. In international road haulage the consignment note is usually a CMR note; the reservation belongs in the field provided. The note secures claims against the carrier; notice of defects to the seller is a second, separate step.
Who inspects when a provider receives the goods?
If your goods are stored by a warehousing provider, the provider carries out the agreed receiving check and reports the result – with us, with a discrepancy report and photos, described under goods receiving as a service. The duty to give notice as buyer stays with you. That is why the reporting route matters: the information must reach you quickly enough for you to give notice promptly. For loose-loaded containers, the unloading report is the basis, see container unloading.
Goods receipt inspection by type of goods
| Goods | What to watch especially |
|---|---|
| Palletised carton goods | film, edge protection, crushed bottom layers |
| Loose container goods | carton count against packing list, wetness on the container floor |
| Machine parts, crates | tilt indicators, crate damage, markings |
| Building material | broken edges, moisture, complete bundles |
| Goods with batch or shelf life | batch and date legible, remaining shelf life |
Common mistakes at goods receiving
- Delivery note signed before counting
- Damage reported verbally only, not on the consignment note
- Photos without reference to the package
- Discrepancy reported to purchasing days later
- Goods booked in although quantity or item is wrong
Key terms
- Goods receipt inspection: check of delivered goods for quantity, type and outer condition
- Consignment note: transport document on which damage is noted with the driver
- Concealed defect: defect that could not be detected on inspection
- Notice of defects: the buyer's complaint to the seller
How does a goods receipt inspection work? The check levels
Which level applies is set per supplier or item in the service description. More checking takes more time; less checking shifts the risk to later stages where errors cost more.
| Level | What is checked | When it makes sense |
|---|---|---|
| 1 – packages | number and outer condition at handover | always, before signing |
| 2 – items and quantity | match against delivery note or notice | mixed deliveries, new suppliers |
| 3 – attributes | batches, dates, serial numbers | FEFO, traceability |
| 4 – content sample | opening selected cartons | high goods value or known problems |
Worked example: sample instead of full check (neutral values)
A sample is only as good as its rule: how many cartons, from which layers, and what happens on a finding. The rule should be fixed in advance, not at the dock.
| Delivery | Cartons | Check | Effort |
|---|---|---|---|
| Full check | 200 | all cartons opened | high |
| Sample | 200 | e.g. 10 cartons from different layers | low |
| Sample with a finding | 200 | extended to all cartons of the batch concerned | medium |
Blocked stock: what happens to goods with issues
Goods whose quantity, condition or attributes do not match should not enter available stock. A block is common: the goods are booked in but not released for orders until you decide – release, return or clarification with the supplier. The block prevents a faulty item from reaching your customers by mistake. It does not replace notification of defects: where § 377 HGB applies, identified defects must be reported to the seller without undue delay. The receiving process with advance notice is described in delivery: advance notice and time slots.
Containers: checking while unloading
With containers of loose-loaded goods, the receipt inspection coincides with unloading. Before opening, container number and seal are matched against the documents and the seal is photographed; then the goods are unloaded layer by layer, counted against the packing list and palletised. Damage is recorded as soon as it becomes visible, and the next steps for affected packages are agreed with you. How we unload containers is described in container unloading.
What “without delay” means for notice of defects
“Promptly” means without culpable delay; the law sets no fixed number of hours. If a provider stores your goods, its receiving check gives you the information, but the notice of defects remains your task. This guide does not replace legal advice.
Questions and answers: Goods receipt inspection checklist
What does a goods receipt inspection include?
Counting packages, checking outer condition, matching items and quantities against delivery note and order, and recording every discrepancy at once – on the consignment note while unloading.
How quickly must I report defects?
In a commercial sale between merchants, promptly, i.e. without culpable delay (Section 377 HGB). The law sets no fixed deadline; the circumstances of the case decide.
Is “subject to inspection” on the delivery note enough?
A blanket reservation helps little. A specific description of the damage with photos is better. It does not replace notice of defects to the seller in any case.
Is there a template for goods receipt inspection?
The checklist above can be used directly as a form: packages, condition, discrepancies, photos, signatures of driver and receiver.
Who is liable for transport damage?
Damage in transit concerns the carrier first; hence the note on the consignment note. Claims against the seller are secured by notice of defects under Section 377 HGB.
What is blocked stock?
Goods booked in but not released for orders – for example because of discrepancies at the receipt inspection. They stay blocked until the client decides.
Is a sample enough for a goods receipt inspection?
Often yes, if the rule is fixed beforehand: scope, selection and what happens on a finding. With high goods value or new suppliers a deeper check can make sense.
What is checked first with a container?
Container number and seal are matched against the documents and photographed before opening. Only then is the container unloaded and counted against the packing list.
Sources
- § 377 HGB – Untersuchungs- und Rügepflicht (accessed 2026-11-11)