Guide
FIFO and FEFO: difference, example
FIFO (first in, first out) means: what was stored first is picked first. FEFO (first expired, first out) means: what expires first is picked first. FEFO requires best-before or expiry dates to be recorded per batch.
Which pallet goes next? For many goods it does not matter, for others it is decisive: packaging material ages, adhesives harden, cosmetics and coated spare parts carry shelf-life dates. The picking rules FIFO and FEFO control the order of picking and can reduce ageing stock; they do not replace stock monitoring. They only work, however, if the necessary data is recorded at put-away.
At a glance
| Rule | Picking by | Prerequisite |
|---|---|---|
| FIFO | date of receipt | receipt date per load unit |
| FEFO | expiry or best-before date | date per batch or load unit |
| LIFO | last stored, first out | hardly suitable for perishable goods |
Difference and example
A delivery of adhesive arrives on 1 March with shelf life until December, a second on 15 March with shelf life until September. Under FIFO the 1 March delivery is picked first because it is older. Under FEFO the 15 March delivery is picked first because it expires earlier. Without an expiry date FEFO cannot be applied; FIFO can still steer by receipt date.
Which rule for which goods?
| Goods | Sensible rule | Note |
|---|---|---|
| no expiry date, no ageing | no fixed rule needed | pick by location |
| ages, but no fixed date | FIFO | e.g. packaging material, film |
| with best-before or expiry date | FEFO | dates per batch must be recorded |
| customers require minimum remaining shelf life | FEFO plus block rule | stock with too short a life is reported as blocked |
What must be recorded at put-away
FIFO needs the receipt date per load unit, FEFO the best-before or expiry date per batch. Both must be visible on delivery – on the label, delivery note or advance notice. If missing, the rule cannot be applied. How batches can be recorded with us is clarified before order picking starts. We do not store chilled food or pharmaceutical products.
Do not confuse picking rules with valuation
Accounting also has a FIFO method – for valuing inventories. It assumes an order of consumption for the balance sheet and need not match actual picking in the warehouse. For stocktaking and stock confirmation, the actual stock counts, see inventory methods.
Implementing FEFO step by step
- Suppliers label batch and shelf life on every load unit
- The advance notice includes batch and date
- Both are recorded at receiving
- At picking, the earliest expiry is taken first
- Goods below minimum remaining shelf life are reported as blocked
Typical mistakes
- Date only on the delivery note, not on the pallet
- Several batches on one pallet without labels
- Rule agreed in the contract but not applied in the process
- Returned goods put back without a date
Key terms
- FIFO: first in, first out – oldest goods first
- FEFO: first expired, first out – earliest expiry first
- LIFO: last in, first out – most recently stored goods first
- Batch: quantity produced under the same conditions
- Minimum remaining shelf life: shelf life that must still remain at the recipient
Worked example: FEFO picking with three batches (neutral values)
Under FIFO batch A would be picked first because it arrived earliest. Under FEFO batch B goes out first because it expires earliest, then the rest from C. The example shows why FEFO does not work without recording the date per batch: the receipt date alone says nothing about the sequence.
| Batch | Received | Best before | Quantity | Picked for a call-off of 150 |
|---|---|---|---|---|
| A | week 1 | month 9 | 100 | – |
| B | week 3 | month 6 | 80 | 80 (first) |
| C | week 5 | month 7 | 120 | 70 |
Remaining shelf life: when goods should no longer be shipped
Many retail customers only accept goods with a minimum remaining shelf life, i.e. a minimum gap between delivery day and best-before date. This requirement belongs in the service description: the warehouse can then check during picking whether a batch still meets the limit, and report goods in time that are about to fall below it. How long the remaining shelf life must be is set by the recipient – not by the warehouse.
FIFO, LIFO and average cost in the balance sheet
For valuing similar inventories, § 256 of the German Commercial Code (HGB) permits simplifying cost-flow assumptions such as FIFO or LIFO, provided they comply with generally accepted accounting principles. That is an accounting question, independent of the order in which the warehouse physically picks. A company can therefore have goods picked under FEFO and still value stock using an average method. Which method fits your accounts is for your tax adviser to decide.
Questions to ask your warehouse about FIFO and FEFO
- Is the date per batch recorded at receiving, or only the receipt date?
- How is new stock prevented from being placed in front of older stock and picked first?
- Is there an alert when goods are about to fall below an agreed remaining shelf life?
- Do batch and date appear in the stock report?
- What happens to goods past their date – block, report, return?
Why block storage often leads to LIFO
The picking rule depends not only on intent but also on storage technique. In block storage pallets stand behind and on top of each other; usually only the front and top pallet is reachable. Later arrivals can easily block access to older stock; without single-batch blocks or deliberate relocation, it amounts to LIFO in practice. In racking with single locations every pallet is directly accessible, and FIFO and FEFO can be controlled through location assignment. For goods with a best-before date, how they are stored therefore matters: a batch should not disappear behind a younger batch. How manufacturers outsource batch goods is shown in warehousing for manufacturers.
Food and medicines: additional duties
Food and medicines are subject to additional legal requirements for storage and traceability. Valuation questions are for your tax adviser.
Questions and answers: FIFO and FEFO in warehousing
What does FIFO mean in a warehouse?
First in, first out: goods stored first are picked first. This counters ageing stock.
What is the difference between FIFO and FEFO?
FIFO follows the date of receipt, FEFO the expiry date. With FEFO a batch delivered later can be picked first if it expires sooner.
What do you need for FEFO?
Best-before or expiry dates per batch, recorded at put-away and used at picking.
When is FEFO better than FIFO?
When goods have a best-before or expiry date and deliveries differ in shelf life – FEFO then prevents short-dated goods from being left behind.
What does LIFO mean in a warehouse?
Last in, first out: the most recently stored goods are picked first. It is hardly suitable for goods with a shelf life.
May I pick under FEFO and value stock under FIFO?
Yes. Physical picking and balance-sheet valuation are separate questions; § 256 HGB only governs valuation. Which method fits is for you to settle with your tax adviser.
What is a minimum remaining shelf life?
The minimum gap between delivery day and best-before date that a recipient requires for acceptance. It is set by the customer and recorded in the service description.
Why does block storage often lead to LIFO?
Because in block storage usually only the front or top pallet is reachable, and later arrivals can hide older stock. Single-batch blocks and deliberate relocation help to keep to FIFO nonetheless.
Sources
- § 256 HGB – Bewertungsvereinfachungsverfahren (accessed 2026-11-11)